Rain or Shine Fresco
Odorless and Antibacterial Elastomeric Paint
Specifications
- USE
For Interior Concrete
- Type
Acrylic, Water-Based
- FINISH
Satin
- COVERAGE
20-25 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
If necessary, thin with 1/4L clean water per 4 liters of paint.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric Paint
36 Standard Colors
Alkali-Resistant
Antibacterial
Excellent Adhesion
Factory Mix Colors
Lead-Free
Low VOC
Mercury-Free
Odorless
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-F300 Rain or Shine Fresco Odorless & Antibacterial Paint White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with Rain or Shine Power Putty.
1st Topcoat: Apply one (1) coat of Rain or Shine Fresco Odorless & Antibacterial Paint (Recoating interval is 1-2 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Fresco Odorless & Antibacterial Paint .
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
