Texas Latex Semi-Gloss White

Economical Architectural Paint

Specifications

For concrete and primed wood
Water-Based
Semi-Gloss
20-25 square meters per 4 liters of paint, depending on surface porosity.

4-Liter
16-Liter

Use as packaged.

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

Economical
Semi-Gloss Finish

Apply by Brush or Roller

DRYING TIME: 30 minutes. Let it dry for 4-6 hours before recoating.

SURFACE PREPARATION :

1. Thoroughly clean the surface that will be painted.
2. Treat the masonry with a neutralizer.
3. Allow the surface to dry overnight.
3. Dust off any salt-like particles on the surface before painting.
4. All the surfaces should be clean and dry before application.

APPLICATION SYSTEM:

New Masonry
1st coat: Latex Semi-Gloss White
2nd coat: Latex Semi-Gloss White
3rd coat: Latex Semi-Gloss White

Repainting Work:
Old Latex Paint (in Good Condition, Strip off the loosely adhering paint)
1st coat: Latex Semi-Gloss White
2nd coat: Latex Semi-Gloss White

Keep the container tightly closed and upright to prevent leakage.

Store in a well-ventilated area.

Always keep in containers with the same material as the original one.

Contain and collect spillage with a non-combustible absorbent material like sand.

For more information about the safety precautions of this product, please request for the safety data sheet.

Related Products

Let us help you paint your vision.

Product Inquiry