Alpha Chroma Tough Floor Epoxy Penetrating Sealer Clear Parts A & B
Sealer for porous concrete floors that promotes a uniform finish for succeeding coats. Basic protection against moisture and stains.
Specifications
- USE
Interior Concrete
- Type
Epoxy-Polyamide Resin
- FINISH
Clear
- COVERAGE
25-30 square meters per 4 liter set per coat, depending on surface porosity and texture
- Quantity
Part A: 3L, Part B: 1L for 3:1 Ratio
- REDUCTION
Use as packaged.
Colors
No Colors Available
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Chemical Resistance
Durable
Epoxy
Lead Safe®
Strong Adhesion
1. Cure concrete for 28 days.
2 .Clean the surface to eliminate any dirt, grease, oil, wax, or other substances that can hinder adhesion.
3. Etch or abrasive blast concrete before use on floors. For previously painted surfaces, scrape loose, scaly, peeling paint and sand the edges.
4. Mix the two components using a 3:1 ratio by volume Part A to Part B
4. Apply epoxy in a thin and even film. Avoid runs and sag in each coat.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.
