- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
Primer & Topcoats: Brush, Roller, or Spray
Cast: Putty Knife or Splatter Gun
New or Repainting
Primer: Apply one (1) coat of ACAP-1850 ALPHA STRONG Acry-Tile Primer.
Putty: To correct imperfections & provide texture
Plain or Textured: ALPHA STRONG Acry-Tile Cast (Recoating interval is 3-5 hours).
1st Topcoat: Apply one (1) coat of ALPHA STRONG Acry-Tile Topcoat (Flat, Semi-Gloss, Gloss, or Clear).
2nd Topcoat: Apply one (1) coat of ALPHA STRONG Acry-Tile Topcoat (Flat, Semi-Gloss, Gloss, or Clear).
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents, strongly alkaline, and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.