Excellent Adhesion
Good Gloss Retention
Weather-Resistant

SURFACE PREPARATION
New Surfaces
1) Sand the surface to remove roughness and loose edges.
2) Clean and dust off.

Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM :
Brush, Roller, or Spray

New or Repainting
Primer: Apply one (1) coat of ACEF-2053 ALPHA STRONG Interior/Exterior Wood Primer White.
Putty: Cover wood defects and nail holes with ACGP-1800 Alpha Strong Enamel “Plasto-Lux" Glazing Putty White.
1st Topcoat: Apply one (1) coat of ALPHA GLOSS Quick Dry Enamel (Recoating interval is overnight).
2nd Topcoat: Apply one (1) coat of ALPHA GLOSS Quick Dry Enamel.

SEMI-DUCO Gloss Finish
Primer: Apply one (1) coat of ACLP-4070 ALPHA STRONG Lacquer Primer White (Flat).
Putty: Repair dents, scratches, and other imperfections with ACLP-1007 ALPHA STRONG Lacquer Glazing Putty.
Primer: Apply one (1) coat of ALPHA STRONG Lacquer Primer White (Flat).
1st Topcoat: Apply one (1) coat of ALPHA GLOSS Quick Dry Enamel.
2nd Topcoat: Apply one (1) coat of ALPHA GLOSS Quick Dry Enamel.

New Galvanized Iron Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.

Repainting - Corroded Galvanized Iron Surfaces
1) Remove rust by wire brushing and sanding.
2) Treat with Alpha Chroma Rust Converter.
3) Wipe with a clean cloth moistened with Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.

Repainting - Uncorroded Galvanized Iron Surfaces
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM:
Brush, Roller, or Spray

New or Repainting
Primer: Apply one (1) coat of Alpha Chroma Preparacoat Red Oxide.
1st Topcoat: Apply one (1) coat of topcoat Alpha Gloss Quick Dry Enamel (Recoating interval is overnight).
2nd Topcoat: Apply one (1) coat of topcoat Alpha Gloss Quick Dry Enamel.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Keep away from oxidizing agents and strongly acidic materials.

Always keep in containers with the same material as the original one.

Available upon request.