Alpha Chroma Alpha Strong Blackboard Slating Paint Green
Blackboard Paint
Specifications
- USE
For Wood
- Type
Alkyd, Solvent-Based
- FINISH
Flat
- COVERAGE
25-30 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L
- REDUCTION
Brush/Roller – Reduce with ¼ liter of Alpha Chroma Alpha Strong Paint Thinner per 4 liters of paint.
Spray – reduce with ½ liter of Alpha Chroma Alpha Strong Paint Thinner per 4 liters of paint.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Excellent Adhesion
High-Hiding
SURFACE PREPARATION :
New Surfaces
1) Clean the surface until it is free from dust, dirt, and other contaminants.
2) Hammer down all nails.
3) Repair surface imperfections with putty.
4) Sand to improve adhesion and dust off.
Repainting
1) Remove any flaking or peeling paint.
2) Spot repair any imperfection with putty.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush, Roller, or Spray
New or Repainting
1st Coat: Apply one (1) coat of ACEF-2053 Alpha Strong Interior/Exterior Wood Primer.
Putty: Apply minor imperfections with Alpha Strong Plasto-Lux Enamel Glazing Putty.
1st Topcoat: Apply one (1) coat of ACBS-9515 Alpha Strong Blackboard Slating Paint Green (Allow overnight drying before recoating).
2nd Topcoat: Apply one (1) coat of ACBS-9515 Alpha Strong Blackboard Slating Paint Green.
New Surfaces
1)Sand the surface to remove roughness and loose edges.
Repainting:
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
Application System: wood
New or Repainting
Primer: Apply one (1) coat of ALPHA STRONG Interior/ Exterior Wood Primer White.
Putty: Cover wood defects and nail holes with Alpha Strong Enamel "Plasto-Lux" Glazing Putty White.
1st Topcoat: Apply one (1) coat of ALPHA STRONG FLATWALL ENAMEL WHITE, ALPHA STRONG INTERIOR SEMI-GLOSS ENAMEL WHITE, or ALPHA GLOSS QUICK DRY ENAMEL.
2nd Topcoat: Apply one (1) coat of ALPHA STRONG FLATWALL ENAMEL WHITE, ALPHA STRONG INTERIOR SEMI-GLOSS ENAMEL WHITE, or ALPHA GLOSS QUICK DRY ENAMEL.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.
