Alpha Chroma Alpha Strong Flatwall Enamel White
Flat Topcoat for Wood System
Specifications
- USE
For Wood
- Type
Alkyd, Solvent-Based
- FINISH
Flat
- COVERAGE
25-30 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
Reduce with ½ liter of Alpha Chroma Alpha Strong Paint Thinner per 4 liters of enamel.
Colors
No data was found
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Excellent Adhesion
Fast-Drying
Good Leveling
High-Hiding
SURFACE PREPARATION:
New Wood Surfaces
1) Sand the surface to remove roughness and loose edges.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM:
Brush, Roller, or Spray
New or Repainting
Primer: Apply one (1) coat of ACEF-2053 Alpha Strong Interior/ Exterior Wood Primer White.
Putty: Cover wood defects and nail holes with Alpha Strong Enamel "Plasto-Lux" Glazing Putty White.
1st Topcoat: Apply one (1) coat of ACEF-2080 Alpha Strong Flatwall Enamel White (Allow overnight drying before recoating).
2nd Topcoat: Apply one (1) coat of ACEF-2080 Alpha Strong Flatwall Enamel White.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.
