Alpha Chroma Alpha Strong Hi-Solids Clear Sanding Sealer
Fast-Drying Sealer
Specifications
- USE
For Wood
- Type
Nitrocellulose, Solvent-Based
- FINISH
Low Sheen
- COVERAGE
25-30 square meters per 4 liters per coat
- Quantity
1L, 4L, 16L
- REDUCTION
Brush – Reduce with ¼L liter Alpha Chroma Lacquer Thinner per 4 liters of sealer.
Spray – Reduce with 1 to 2 liters of Alpha Chroma Lacquer Thinner per 4 liters of sealer.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Easy-to-Apply
Fast-Drying
High-Hiding
SURFACE PREPARATION:
New Surfaces
1) Clean the wooden surface until it is free from dust, dirt, and other contaminants.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth and let it dry.
Repainting:
1) Remove any flaking or peeling paint.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth.
4) Clean and dust off the surface.
APPLICATION SYSTEM:
Brush or Spray
New or Repainting
GLOSS - Natural Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ACWF-2400 ALPHA STRONG Wood Filler.
Sealer: Apply one (1) coat of ACSS-3600 ALPHA STRONG CLEAR SANDING SEALER (Recoating interval is 30 minutes. Repeat this step, if necessary, followed by light sanding).
1st Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, ACCG-1000 ALPHA STRONG Water White Clear Gloss (Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish.
2nd Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, AACCG-1000 ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish.
FLAT - Natural Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler.
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (Repeat this step, if necessary, followed by light sanding).
1st Topcoat: Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.
2nd Topcoat: Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.
GLOSS - Stained Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat).
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (Repeat this step, if necessary, followed by light sanding).
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain
1st Topcoat: Apply one (1) coat of ALPHA STRONG Clear Gloss Lacquer or ALPHA STRONG Water White Clear Gloss (Hi-Solids) or ALPHA STRONG Bespar Varnish.
2nd Topcoat: Apply one (1) coat of ALPHA STRONG Clear Gloss Lacquer or ALPHA STRONG Water White Clear Gloss (Hi-Solids) or ALPHA STRONG Bespar Varnish.
FLAT - Stained Finish
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat).
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (Repeat this step, if necessary, followed by light sanding).
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain
1st Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Dead Flat Lacquer.
2nd Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Dead Flat Lacquer.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.