Alpha Chroma Alpha Strong Interior Semi-Gloss Enamel White

Semi-Gloss Topcoat for Wood System

Specifications

For Wood and Metal
Alkyd, Solvent-Based
Semi-Gloss
25-30 square meters per 4 liters per coat, depending on surface porosity

4L, 16L

Reduce with ½ liter of Alpha Chroma Alpha Strong Paint Thinner per 4 liters of enamel.

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

Excellent Adhesion
High-Hiding

SURFACE PREPARATION:

New Wood Surfaces
1) Sand the surface to remove roughness and loose edges.

Repainting:
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM:
Brush or Roller

New or Repainting
Primer: Apply one (1) coat of ACEF-2053 Alpha Strong Interior/ Exterior Wood Primer White.
Putty: Cover wood defects and nail holes with Alpha Strong Enamel "Plasto-Lux" Glazing Putty White.
1st Topcoat: Apply one (1) coat of ACSE-2235 Alpha Strong Interior Semi-Gloss Enamel White (Allow overnight drying before recoating).
2nd Topcoat: Apply one (1) coat of ACSE-2235 Alpha Strong Interior Semi-Gloss Enamel White.

New Galvanized Iron Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.

Repainting - Corroded Galvanized Iron Surfaces
1) Remove rust by wire brushing and sanding.
2) Treat with ACRC-0276 Alpha Chroma Rust Converter.
3) Wipe with a clean cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.

Repainting - Uncorroded Galvanized Iron Surfaces
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM:
Brush, Roller, or Spray

New or Repainting
Primer: Apply one (1) coat of Alpha Chroma Preparacoat Red Oxide.
1st Topcoat: Apply one (1) coat of Alpha Chroma Interior Semi-Gloss Enamel (Allow overnight drying before recoating).
2nd Topcat: Apply one (1) coat of Alpha Chroma Interior Semi-Gloss Enamel.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Keep away from oxidizing agents and strongly acidic materials.

Always keep in containers with the same material as the original one.

Available upon request.

Related Products

Let us help you paint your vision.

Product Inquiry