Alpha Chroma Alpha Strong Lacquer Topcoat
Durable Finish Coat
Specifications
- USE
For Wood and Metal
- Type
Nitrocellulose, Solvent-Based
- FINISH
Gloss
- COVERAGE
25-30 square meters per 4 liters per coat
- Quantity
1L, 4L
- REDUCTION
Spray – Reduce with 2-4 liters of Alpha Strong Lacquer Thinner per 4 liters of paint.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Durable Finish
Easy-to-Apply
Fast-Drying
High-Hiding
SURFACE PREPARATION:
New Surfaces
1) Clean the wooden surface until it is free from dust, dirt, and other contaminants.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth and let it dry.
Repainting:
1) Remove any flaking or peeling paint.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth.
4) Clean and dust off the surface.
APPLICATION SYSTEM :
Spray
New or Repainting
DUCO : Gloss Finish
Primer : Apply one (1) coat of ACLP-4070 ALPHA STRONG Lacquer Primer White.
Putty : Repair dents, scratches, and other imperfections with ACLP-1007 ALPHA STRONG Lacquer Glazing Putty White.
Primer : Apply one (1) coat of ACLP-4070 ALPHA STRONG Lacquer Primer White.
1st Topcoat : Apply one (1) coat of ACPL-1070 ALPHA STRONG Lacquer Topcoat White (Recoating interval is 30 minutes).
2nd Topcoat : Apply one (1) coat of ACPL-1070 ALPHA STRONG Lacquer Topcoat White.
New Galvanized Iron Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.
Repainting - Corroded
1) Remove rust by wire brushing and sanding.
2) Treat with ACRC-0276 Alpha Chroma Rust Converter.
3) Wipe the surface with a clean cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.
Repainting - Uncorroded
1) Remove any flaking or peeling paint.
2) Sand,clean, and dust off the surface.
APPLICATION SYSTEM :
Spray
New or Repainting
Primer : Apply one (1) coat of ACEP-4000 Aplha Strong Epoxy Metal Primer Red Oxide.
Putty : Alpha ACLP-1007 Strong Lacquer Glazing Putty White.
1st Topcoat : Apply one (1) coat of ACPL-1070 Alpha Chroma Lacquer Topcoat.
2nd Topcoat : Apply one (1) coat of ACPL-1070 Alpha Chroma Lacquer Topcoat.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.