Alpha Chroma Alpha Strong NGR Woodstain
Coloring for Interior Wood Finishes and Rattan
Specifications
- USE
For Wood
- Type
Pigment Blend, Solvent-Based
- FINISH
Semi-Transparent Colored Solution
- COVERAGE
25-30 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L
- REDUCTION
Use as packaged.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Easy-to-Apply
High Strength
SURFACE PREPARATION:
New Surfaces
1) Clean the wooden surface until it is free from dust, dirt, and other contaminants.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth and let it dry.
Repainting:
1) Remove any flaking or peeling paint.
2) Hammer down the nail heads.
3) Sand the surface until it is smooth.
4) Clean and dust off the surface.
APPLICATION SYSTEM:
Brush or wipe with a rolled cloth.
New or Repainting
GLOSS - Stained Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ACWF-2400 ALPHA STRONG Wood Filler.
Sealer: Apply one (1) coat of ACSS-3600 ALPHA STRONG CLEAR SANDING SEALER (repeat this step, if necessary, followed by light sanding)
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain. After 5-10 minutes, wipe off excess stain with a clean and soft cloth in the direction of the grain.
1st Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, ACCG-1000 ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish.
2nd Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, ACCG-1000 ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish
FLAT - Stained Finish.
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat). Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (repeat this step, if necessary, followed by light sanding).
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain.
1st Topcoat : Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.
2nd Topcoat: Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Keep away from oxidizing agents and strongly acidic materials.
Always keep in containers with the same material as the original one.
Available upon request.
