Easy-to-Apply
Excellent Adhesion

SURFACE PREPARATION:
New Surfaces
1) Clean the surface until it is free from dust, dirt, and other contaminants.
2) Hammer down all nail heads.
3) Sand the surface until smooth.

Repainting:
1) Remove any flaking or peeling paint.
2) Hammer down nail heads.
3) Sand to smooth, clean, and dust off

SYSTEM APPLICATION:
Work across the grain with a cloth.

New or Repainting
GLOSS - Natural Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2.
Putty: Apply one (1) coat of ACWF-2400 ALPHA STRONG Wood Filler (Flat).

Allow the material to set for 10-15 minutes before working with a cloth across the grain. Wipe off the excess filler and allow overnight drying before recoating with a sanding sealer and clear lacquer or varnish.

Sealer: Apply one (1) coat of ACSS-3600 ALPHA STRONG CLEAR SANDING SEALER (repeat this step, if necessary, followed by light sanding).

1st Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, ACCG-1000 ALPHA STRONG Water White Clear Gloss (Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish.
2nd Topcoat: Apply one (1) coat of ACCG-1500 ALPHA STRONG Clear Gloss Lacquer, ACCG-1000 ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ACWB-1000 ALPHA STRONG Bespar Varnish.

FLAT - Natural Finish
Optional: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat).
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (repeat this step, if necessary, followed by light sanding).
1st Topcoat: Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.
2nd Topcoat: Apply one (1) coat of ALPHA STRONG Clear Dead Flat Lacquer.

GLOSS - Stained Finish
Surface Preparation: Apply ALPHA STRONG WOOD BLEACH 1& 2
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat).
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING SEALER (repeat this step, if necessary, followed by light sanding).
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain.
1st Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Gloss Lacquer, ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ALPHA STRONG Bespar Varnish.
2nd Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Gloss Lacquer, ALPHA STRONG Water White Clear Gloss(Hi-Solids), or ALPHA STRONG Bespar Varnish.

FLAT - Stained Finish
Putty: Apply one (1) coat of ALPHA STRONG Wood Filler (Flat).
Sealer: Apply one (1) coat of ALPHA STRONG CLEAR SANDING. SEALER (repeat this step, if necessary, followed by light sanding)
Stain: ALPHA STRONG Oil Woodstain or ALPHA STRONG NGR Stain.
1st Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Dead Flat Lacquer.
2nd Topcoat: Apply one (1) coat of topcoat ALPHA STRONG Clear Dead Flat Lacquer.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Keep away from oxidizing agents and strongly acidic materials.

Always keep in containers with the same material as the original one.

Available upon request.