Alpha Chroma Alpha White Prime Acrylic Latex Low Sheen Paint
Ultra-Premium Low Sheen White Wall Paint
Specifications
- USE
For Interior and Exterior Cconcrete Surfaces, Fiber Cement Boards, and Properly Primed Wood Surfaces
- Type
Acrylic, Water-Based
- FINISH
Low Sheen
- COVERAGE
30-35 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
If necessary, reduce with ½ liter of water per 4 liters of paint.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Alkali-Resistant
Excellent Adhesion
UV-Resistant
Weather-Resistant
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce
water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Â
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
Â
APPLICATION SYSTEM:
Brush, Roller and Airless Spray
Â
New or Repainting
Primer: Apply one (1) coat of AW-1058 ALPHA WHITE Prime Acrylic Latex Concrete Primer
Putty: Repair surface imperfections with AW-1938 ALPHA WHITE Masonry Putty.
1st Topcoat: Apply one (1) coat of ALPHA WHITE Prime Acrylic Latex Low Sheen
2nd Topcoat: Apply one (1) coat of ALPHA WHITE Prime Acrylic Late Low Sheen
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
