Alpha Chroma Cleansing Solution #2
Pre-Treatment Solution
Specifications
- USE
For Concrete
- Type
Solvents and Additives Blend
- FINISH
Water-White Liquid
- COVERAGE
15-20 square meters per 4 liters,depending on surface porosity
- Quantity
4L
- REDUCTION
Use as packaged.
Colors
No data was found
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Preparation Agent
SURFACE PREPARATION
New Surfaces
1) Clean the surface until it is free from dust, dirt, grease, and other contaminants.
2) Let it dry.
APPLICATION :
Brush or Roller
New Surfaces
1) After the application procedure for ACCT-0726 Alpha Strong Cleansing Solution #1, apply ACCT-0727 Alpha Strong Cleansing Solution #2 to the concrete surface.
2) Soak a clean rag with Alpha Strong Cleansing Solution #2 and scrub onto the concrete surface until all the dirt is absorbed.
3) Dry the surface for at least 15 minutes, then proceed with ACRC-7266 Alpha Strong Acid Etching procedure.
Keep the container dry and tightly closed in a cool and well-ventilated place.
Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.
Opened containers must be resealed carefully and kept upright to prevent leakage.
Materials and conditions to avoid incompatibility: Strong oxidizing agents, caustics, amines, halogens, aldehydes, concentrated nitric or sulfuric acid, or molted sulfur.
Always keep in containers with the same material as the original one.
Available upon request.
