Arkhon Fine Skim Coat
Fine Ready-to-Use Skimcoat
Specifications
- USE
For Interior/Exterior Concrete
- Type
Acrylic, Water-Based
- FINISH
Flat
- COVERAGE
15-25 square meters per 20 liters, depending on surface porosity
- Quantity
1.5 KG, 5 KG, 20 KG
- REDUCTION
Use as packaged.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
Flexible
Excellent Adhesion
Alkali-Resistant
Crack-Bridging
Lead-Free
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels. There is no need to neutralize concrete. Correct plumbness of more than 4 mm thick with exterior renders.
2) Clean substrate of dirt, dust, and other contaminants and let dry.
Repainting
1) Remove any existing material and scrape to bare.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Trowel or Putty Knife
New or Repainting
1) Apply two (2) coats of Arkhon Skim Coat directly to the surface. The recoating interval should be 1-2 hours. Do not add water or other materials.
2) Let it dry and then sand. The drying time of Arkhon Acrylic Skim Coat depends on the wet film thickness of the applied Skim Coat.
3) Dust off the material before applying the topcoat. Allow at least a day for the topcoat to cure before applying paint.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.