Glasurit Acrylic Spot Putty

Acrylic Lacquer Putty

Specifications

For metal surfaces.
Solvent-Based
25-30 square meters per 4 liters

1-Liter

Use as Packaged

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

German Formulation by BASF
Premium Quality
Repairs Surface Imperfections

SURFACE PREPARATION

System A: Strip to Bare Metal
1. Remove the old paint with 400-5230 Octane Paint Remover, then flush with water and dry.
2. Treat the bare metal with 360-1000 Glasurit Metal Conditioner-Colorless.
3. Wash with water and rinse with Lacquer Thinner.
4. Dry sand the area with sandpaper # 280-300
5. Wipe the area with a solvent cleaner to ensure a clean surface.

System B: Wash Over OEM
1. Wet or dry sand with sandpaper # 300-320.
2. Featheredge where needed, then wipe with the solvent cleaner to ensure a clean surface free from moisture and oil.

APPLICATION SYSTEM

For System A
Primer: Epoxy Primer

For Systems A and B
Putty: Apply Body Filler to large dents and deep scratches.
Apply Para-Lux Acrylic Putty when necessary.

The surface should be primed before application and after sanding the applied putty. Do not apply directly to the bare metal surface. Metal must be primed or surface coated and sanded. It must be clean, dry, and free from dirt, grease, oil, rust, or other contaminations. Apply putty using a squeegee or putty knife. For best results, apply in several thin coats with five-minute intervals in between coats. Once dry, wet or dry sand with #180 or #220 sandpaper. Wipe or blow off with air to remove dust before applying acrylic primer filler.

Sealing: Apply Acrylic Primer to seal body filler and ensure uniform color hold out.
Topcoat: Spray three or more double wet coats of Acrylic Lacquer Color until proper depth and coverage is obtained.
Topcoat: Finish off with a Topcoat Clear.
Let it dry for 1-2 days before compounding.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Always keep in containers with the same material as the original one.

Observe label precautions.

Contain and collect spillage with a non-combustible absorbent material like sand.

For more information about the safety precautions of this product, please request for the safety data sheet.

Related Products

Let us help you paint your vision.

Product Inquiry