Rain or Shine Classic
Semi-Gloss Elastomeric Topcoat
Specifications
- USE
For Interior/Exterior Concrete
- Type
Acrylic, Water-Based
- FINISH
Semi-Gloss
- COVERAGE
20-25 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
Use as packaged.
Colors
Almost Black
ROS-CL-153
#4D5154
White
ROS-CL-100
#FFFFFF
Ceramic White
ROS-CL-118
#EFECE6
White Smoke
ROS-CL-189
#F9F6E2
Satin White
ROS-CL-123
#ECE4D2
Tropical Sand
ROS-CL-157
#D8D0BE
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric
21 Standard Colors
Alkali-Resistant
Classic Shine
Excellent Adhesion
Factory Mix Colors
Lead-Free
UV-Resistant
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-8000 Rain or Shine Elasto-Proofer or ROS-7000 Rain or Shine Prepa-White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty White.
1st Topcoat: Apply one (1) coat of Rain or Shine Classic Elastomeric Semi-Gloss (Recoating interval is 1-2 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Classic Elastomeric Semi-Gloss.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
