Rain or Shine Dirt Shield
Dirt-Resistant Elastomeric Topcoat
Specifications
- USE
For Exterior Concrete
- Type
Acrylic, Water-Based
- FINISH
Semi-Gloss
- COVERAGE
20-25 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
Use as packaged.
Colors
Concrete Gray
ROS-DS-178
#94A1A0
Iceberg
ROS-DS-105
#D7EBDC
Beachfront
ROS-DS-155
#E9DAB6
White Chocolate
ROS-DS-129
#F1E0C9
Pristine
ROS-DS-117
#FEFEEF
Cloud Nine
ROS-DS-193
#D1CEC5
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric Paint
34 Standard Colors
Alkali-Resistant
Dirt-Resistant
Excellent Adhesion
Excellent Gloss Retention
Factory Mix Colors
Lead-Free
Mildew and Fungi-Resistant
UV-Resistant
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-7000 Rain or Shine Prepa-White, ROS-8000 Shine Elasto-Proofer White, or ROS-WM-6000 Rain or Shine Wall Mastic White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty White.
1st Topcoat: Apply one (1) coat of Rain or Shine Dirt Shield Semi-Gloss (Recoating interval is 1-2 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Dirt Shield Semi-Gloss.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
