Rain or Shine Elasto-Proofer
Waterproofing Elastomeric Primer
Specifications
- USE
For Interior/Exterior Concrete
- Type
Acrylic, Water-Based
- FINISH
Low Sheen
- COVERAGE
20-25 square meters per 4 liters per coat, depending on surface porosity
- Quantity
4L, 16L
- REDUCTION
Use as packaged.
Colors
No data was found
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric Waterproofer
Alkali-Resistant
Breathable Primer and Undercoat
Clean White
Crack-Bridging
Excellent Adhesion
Lead-Free
UV-Resistant
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-8000 Rain or Shine Elasto-Proofer.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty.
1st Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
2nd Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.