Rain or Shine Roof Mastic
Elastomeric Roof Topcoat and Sealant
Specifications
- USE
For Galvanized Iron, Unglazed Roof Tiles
- Type
Acrylic, Water-Based
- FINISH
Low Sheen
- COVERAGE
15-20 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
Use as packaged.
Colors
White
ROS-RM-12000
#FFFFFF
Crystal Blue
ROS-RM-12733
#0E619C
Azure Blue
ROS-RM-12777
#002461
Baguio Green
ROS-RM-12911
#192420
Crystal Green
ROS-RM-12900
#1C886D
Samar Beige
ROS-RM-12183
#B6AD79
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric
13 Standard Colors
Alkali-Resistant
Crack-Bridging
Factory Mix Colors
Lead-Free
Paint & Seal Technology
Superb Adhesion
Tough Yet Flexible
UV-Resistant
Water-Resistant Membrane
SURFACE PREPARATION :
Galvanized Iron Sheets
New Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.
3) Apply ACPRE-6500 Alpha Chroma Zinc Primer Yellow or
ACPRE-6360 Alpha Chroma Zinc Primer Green.
Repainting - Corroded
1) Remove rust by wire brushing and sanding.
2) Treat the area with ACRC-0276 Alpha Chroma Rust Converter.
3) Wipe with a clean cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.
4) Spot prime corroded areas with ACPRE-6500 Alpha Chroma Zinc Primer Yellow or ACPRE-6360 Alpha Chroma Zinc Primer Green before rust sets in.
Repainting - Uncorroded
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
1st Topcoat: Apply one (1) coat of ROS-WM-6000 Rain or Shine Roof Mastic White.
2nd Topcoat : Apply one (1) coat of Rain or Shine Roof Mastic (Recoating interval is 2-4 hours).
3rd Topcoat : Apply one (1) coat of Rain or Shine Roof Mastic.
SURFACE PREPARATION:
Unglazed Roof Tiles
New Surfaces
1) Treat the surface with ACCN-7250 Alpha Chroma Concrete Neutralizer.
2) Wash with water to remove unwanted deposits.
3) Allow the surface to dry thoroughly.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-RM-12000 Rain or Shine Roof Mastic.
1st Topcoat: Apply one (1) coat of Rain or Shine Roof Mastic (Recoating interval is 2-4 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Roof Mastic.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
