Rain or Shine Sun Roof

Elastomeric Roofing Paint

Specifications

For Galvanized Iron, Unglazed Roof Tiles
Acrylic, Water-Based
Gloss
25-30 square meters per 4 liters per coat, depending on surface profile

1L, 4L, 16L

If necessary, thin with ¼ liter clean water per 4 liters of paint.

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

100% Elastomeric Paint
22 Standard Colors
Alkali-Resistant
Dirt-Resistant
Easy-to-Clean
Excellent Adhesion
Excellent Gloss Retention
Factory Mix Colors
Lead-Free
UV-Resistant

SURFACE PREPARATION :
Galvanized Iron Sheets

New Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.
3) Apply ACPRE-6500 Alpha Chroma Zinc Primer Yellow or
ACPRE-6360 Alpha Chroma Zinc Primer Green.

Repainting - Corroded
1) Remove rust by wire brushing and sanding.
2) Treat the area with ACRC-0276 Alpha Chroma Rust Converter.
3) Wipe with a clean cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.
4) Spot prime corroded areas with ACPRE-6500 Alpha Chroma Zinc Primer Yellow or ACPRE-6360 Alpha Chroma Zinc Primer Green before rust sets.

Repainting -Uncorroded
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM :
Brush, Roller, and Airless Spray

New or Repainting
Optional: Apply one (1) coat of ROS-RM-12000 Rain or Shine Roof White.
1st Topcoat: Apply one (1) coat of Rain or Shine Sun Roof (Recoating interval is 1-2 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Sun Roof.
3rd Coat (Optional): Apply one (1) coat of Rain or Shine Sun Roof.

SURFACE PREPARATION:
Unglazed Roof Tiles

New Surfaces
1) Treat the surface with ACCN-7250 Alpha Chroma Concrete Neutralizer.
2) Wash with water to remove unwanted deposits.
3) Allow the surface to dry thoroughly.

Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

APPLICATION SYSTEM

New or Repainting
Optional Primer: Apply one (1) coat of ROS-8000 Rain or Shine Elasto-Proofer White or ROS-RM-12000 Rain or Shine Roof Mastic White.
1st Topcoat: Apply one (1) coat of Rain or Shine Sun Roof.
2nd Topcoat: Apply one (1) coat of Rain or Shine Sun Roof.
3rd Topcoat (optional): Apply one (1) coat of Rain or Shine Sun Roof.

Keep the container tightly closed and upright to prevent leakage.

Store in a well-ventilated area.

Always keep in containers with the same material as the original one.

Contain and collect spillage with a non-combustible absorbent material like sand.

Available upon request.

Related Products

Let us help you paint your vision.

Product Inquiry