Rain or Shine Wall Mastic
Elastomeric Wall Primer, Topcoat, and Sealant
Specifications
- USE
For Interior/Exterior Concrete
- Type
Acrylic, Water-Based
- FINISH
Low Sheen
- COVERAGE
15-20 square meters per 4 liters per coat, depending on surface porosity
- Quantity
1L, 4L, 16L
- REDUCTION
Use as packaged.
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
100% Elastomeric
18 Standard Colors
Alkali-Resistant
Crack-Bridging
Factory Mix Colors
Lead-Free
Mildew-Resistant
Paint & Seal Technology
Superb Adhesion
UV-Resistant
Water-Resistant Membrane
SURFACE PREPARATION:
New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
APPLICATION SYSTEM :
Brush or Roller
New or Repainting
Primer: Apply one (1) coat of ROS-WM-6000 Rain or Shine Wall Mastic White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty White.
1st Topcoat: Apply one (1) coat of Rain or Shine Wall Mastic (Recoating interval is 2-4 hours).
2nd Topcoat: Apply one (1) coat of Rain or Shine Wall Mastic.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Available upon request.
