Sista D100 Plus Waterproofer and Sealer
Multipurpose Waterproofer and Sealer
Specifications
- USE
For Concrete, Metal, Wood, Tile, Brick, and Aluminium
- Type
Special Acrylic, Water-Based
- FINISH
Gray, Viscous Paste
- COVERAGE
1.0 kg/square meter at 1.0 mm
- Quantity
1L (1kg), 4L (4kg), 20L (20kg)
- REDUCTION
Use as packaged.
Colors
No Colors Available
- Product Features
- Product Instructions
- Storage and Handling
- Safety Precautions
German Technology by Henkel
Highly Tensile
Highly Flexible
Paintable
Seal Cracks up to 5 Millimeters
UV-Resistant
Versatile Waterproofer
Weather-Resistant
SURFACE PREPARATION:
New Surfaces
1) Clean the surface from dust, grease, and other contaminants before application.
2) Leave substrate to dry before application.
SYSTEM APPLICATION :
Brush, Roller, and Putty Knife
1) Apply at least two (2) layers of Sista D100 Plus by brush, roller, or spatula. Each layer should cross the other at a right angle.
2) Allow the previous layer to dry for 30 minutes.
3) Cure the adhesive for 24 hours.
4) Let it dry and apply a topcoat for extra protection.
Use only in well-ventilated areas.
Store in a cool and dry place.
Do not use any acidic-alkaline agents to clean the product.
Do not use with waterlogging areas.
Available upon request.
