Welcoat Gloss Latex White

Economical Gloss Paint


For Interior/Exterior Concrete
Modified Acrylic Water-Based
20-25 square meters per 4 liters per coat, depending on surface porosity

1L, 4L, 16L

Use as packaged. If necessary, reduce with 1/2L water per 4 liters of paint.

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

Clean White
Good Adhesion


New Surfaces
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.

1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

Brush or Roller

New or Repainting
Primer: Apply one (1) coat of WL-1008 Welcoat Masonry Primer White.
Putty: Repair surface imperfections with WL-1935 Welcoat Masonry Putty White.
1st Topcoat: Apply one (1) coat of topcoat WL-1060 Welcoat Gloss Latex White (Recoating interval is 1-2 hours).
2nd Topcoat: Apply one (1) coat of topcoat WL-1060 Welcoat Gloss Latex White.

Keep the container tightly closed and upright to prevent leakage.

Store in a well-ventilated area.

Always keep in containers with the same material as the original one.

Contain and collect spillage with a non-combustible absorbent material like sand.

Available upon request.

Related Products

Let us help you paint your vision.

Product Inquiry