Corrosion-Resistant
Excellent Adhesion
Good Gloss Retention

New Wood Surfaces
1) Sand the surface to remove roughness and loose edges.
2) Clean and dust off.

Repainting
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

Application System

New or Repainting
Primer: Apply one (1) coat of ACEF-2053 ALPHA STRONG Interior/Exterior Wood Primer White.
Putty: Cover wood defects and nail holes with ACGP-1800 Alpha Strong Enamel “Plasto-Lux" Glazing Putty White.
1st Topcoat: Apply one (1) coat of Welcoat Marine Enamel.
2nd Topcoat: Apply one (1) coat of Welcoat Marine Enamel.

New Galvanized Iron Surfaces
1) Apply ACGT-0369 Alpha Chroma Galva Treat Solution and rinse with clear water.
2) Wipe the surface with a cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted Alpha Chroma Galva-Treat Solution. Do not use turpentine or mineral spirits since they leave an oily deposit on the surface.

Repainting - Corroded Galvanized Iron
1) Remove rust by wire brushing and sanding.
2) Treat with ACRC-0276 Alpha Chroma Rust Converter.
3) Wipe with a clean cloth moistened with ACT-1610 Alpha Chroma Lacquer Thinner to eliminate unreacted rust converter.

Repainting - Uncorroded Galvanized Iron
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.

Application System

New or Repainting
Primer: Apply one (1) coat of Welcoat Metal Primer.
1st Topcoat: Apply one (1) coat of topcoat Welcoat Marine Enamel.
2nd Topcoat: Apply one (1) coat of topcoat Welcoat Marine Enamel.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Keep away from oxidizing agents, strongly alkaline, and strongly acidic materials.

Always keep in containers with the same material as the original one.

Available upon request.