Welcoat Premium All-Purpose Polyester Body Filler

Body Filler


For Dry Walls, Wood, Metal, and Fiberglass
Polyester Resin, Solvent-Based
Dependent on thickness and imperfections

1L, 4L

Use as packaged.

  • Product Features
  • Product Instructions
  • Storage and Handling
  • Safety Precautions

Excellent Adhesion


New & Repainting
1) Surface must be clean and dry. Remove dust, dirt, grease, oil, wax, paint, and rust.
2) Sand the surface using coarse sandpaper or grind the area.

Putty Knife or Spreader

1) Place the desired amount of filler on a clean non-porous surface such as glass or metal.
2) Add the cream hardener proportionately (2-3 parts hardener to 100 parts of filler).
3) Mix thoroughly using a putty knife or plastic spreader. Working time is approximately 6-8 minutes at room temperature.
4) Apply a thin layer of mixed filler with a putty knife spreader to the damaged area or surface using firm pressure to ensure good adhesion.
5) Allow the filler to harden for approximately 30 minutes.
6) Sand to desired smoothness and cure for 2 hours.
7) Apply subsequent primer and finish coat as per the manufacturer's instruction.

Keep the container dry and tightly closed in a cool and well-ventilated place.

Isolate from sources of heat, sparks, and open flame. Do not use sparkling tools.

Opened containers must be resealed carefully and kept upright to prevent leakage.

Keep away from oxidizing agents and strongly acidic materials.

Always keep in containers with the same material as the original one.

Available upon request.

Related Products

Let us help you paint your vision.

Product Inquiry